SCI-FI ARCTIC HQ TRENCH EXPANSION (OpenLOCK)
Straight from January's Patreon comes this Arctic HQ Trench set. This set contains 29 parts and an OpenLOCK clip that connects all the parts together with a satisfying click. It uses the OpenLOCK system by printablescenery.com, like all my Arctic Terrain. This will give you plenty of options to add to the Sci-Fi Arctic HQ base set (sold separately) . There are plenty of new expansions out on my Patreon, like this, and the whole set will build into something varied and huge when they come to my Gumroad store.
There are gun positions (including trench gun), curves, wiggles, corners, floor grates, pieces to connect to rest of the HQ sets, and a load of other bits! Each is sculpted with detail and precision. I have some great settings with which to print this set that give excellent detail and quality, but at a greatly reduced time (24% faster than usual at that layer height):
Layer Height: 0.12 mm
Initial Layer Height: 0.12 mm
Build Plate Adhesion: RAFT
Use Adaptive Layers: True
Wall Thickness: 0.8 mm
Infill Density: 5 %
Infill Pattern: Lines
Printing Temperature: 210.0 C
(I use Sun PLA+ and this is a good temperature for that, you might want to adjust it according to your PLA manufacturers recommended temperature)
Inner Wall Speed: 50 mm/s
It's made for FDM printers, but you could probably have a go at printing it on an SLA printer, but you'll have to hollow the parts and put in some drain holes.
PLEASE NOTE: THIS IS NOT A PHYSICAL PRODUCT; YOU WILL RECEIVE DIGITAL FILES DESIGNED FOR 3D PRINTING AT HOME
By purchasing this product, you agree to abide by the following terms and conditions:
These files are for personal use only. You may not sell, share, or distribute the files, prints, or their derivatives under any circumstance.
You may modify or resize the models or files for personal use only. You may not sell or distribute modified models or any models and files containing portions of Squamous Miniatures models.
1 ZIP file containing 29 STLs